Thermal Det/ Droid Popper (sound available)
from $15.00
NOW WITH SOUND!!!!
imgur.com/a/Jro7qBH
Thermal Detonator prop inspired by Star Wars. Electronics installed and ready to go. Battery (9v) operated and battery included. Top half and bottom half snap together and hold tight, but are able to be split apart again (may need a bit of leverage) to replace the battery/make repairs if necessary.
Droid Popper comes with White-blue LEDs instead of Yellow along the equator
un-built kit also available,
Fully Finished- 3d printed Thermal Detonator prop, print lines removed, painted, weathered, clear coated. electronics installed battery included.
Un-finished kit- 3d printed Thermal Detonator prop, no clean up/sanding done. 3 pieces. Electronics assembled, no battery, ready to install, Install instructions (pictures).
Electronics only- Electronics Kit assembled, install instructions
Electronics Install Instructions: https://docs.google.com/document/d/1DlJV_XNeil9f0Qft2vti2_T5GhVjtutn14YR2aTx9AM/edit?usp=sharing
*if your Thermal Detonator electronics ends up needing to be repaired I CAN do so for the cost of shipping back and forth. However, anyone who has a little bit of soldering knowledge should also be able to make any necessary repairs.
*6 month warranty- if the control board stops working within the first 6 months after receiving your prop I will replace it (just provide shipping for the return and re-sending). After this you will have to buy a new electronics kit (as listed above)
*Please Note at this time the SOUND that this prop has is a 4 tone beep that is NOT the same as the sound effect from the movie. While I am working to get that sound functional, I do not have it at this time. please see the above linked video
imgur.com/a/Jro7qBH
Thermal Detonator prop inspired by Star Wars. Electronics installed and ready to go. Battery (9v) operated and battery included. Top half and bottom half snap together and hold tight, but are able to be split apart again (may need a bit of leverage) to replace the battery/make repairs if necessary.
Droid Popper comes with White-blue LEDs instead of Yellow along the equator
un-built kit also available,
Fully Finished- 3d printed Thermal Detonator prop, print lines removed, painted, weathered, clear coated. electronics installed battery included.
Un-finished kit- 3d printed Thermal Detonator prop, no clean up/sanding done. 3 pieces. Electronics assembled, no battery, ready to install, Install instructions (pictures).
Electronics only- Electronics Kit assembled, install instructions
Electronics Install Instructions: https://docs.google.com/document/d/1DlJV_XNeil9f0Qft2vti2_T5GhVjtutn14YR2aTx9AM/edit?usp=sharing
*if your Thermal Detonator electronics ends up needing to be repaired I CAN do so for the cost of shipping back and forth. However, anyone who has a little bit of soldering knowledge should also be able to make any necessary repairs.
*6 month warranty- if the control board stops working within the first 6 months after receiving your prop I will replace it (just provide shipping for the return and re-sending). After this you will have to buy a new electronics kit (as listed above)
*Please Note at this time the SOUND that this prop has is a 4 tone beep that is NOT the same as the sound effect from the movie. While I am working to get that sound functional, I do not have it at this time. please see the above linked video
Primary color:
Device:
Quantity:
NOW WITH SOUND!!!!
imgur.com/a/Jro7qBH
Thermal Detonator prop inspired by Star Wars. Electronics installed and ready to go. Battery (9v) operated and battery included. Top half and bottom half snap together and hold tight, but are able to be split apart again (may need a bit of leverage) to replace the battery/make repairs if necessary.
Droid Popper comes with White-blue LEDs instead of Yellow along the equator
un-built kit also available,
Fully Finished- 3d printed Thermal Detonator prop, print lines removed, painted, weathered, clear coated. electronics installed battery included.
Un-finished kit- 3d printed Thermal Detonator prop, no clean up/sanding done. 3 pieces. Electronics assembled, no battery, ready to install, Install instructions (pictures).
Electronics only- Electronics Kit assembled, install instructions
Electronics Install Instructions: https://docs.google.com/document/d/1DlJV_XNeil9f0Qft2vti2_T5GhVjtutn14YR2aTx9AM/edit?usp=sharing
*if your Thermal Detonator electronics ends up needing to be repaired I CAN do so for the cost of shipping back and forth. However, anyone who has a little bit of soldering knowledge should also be able to make any necessary repairs.
*6 month warranty- if the control board stops working within the first 6 months after receiving your prop I will replace it (just provide shipping for the return and re-sending). After this you will have to buy a new electronics kit (as listed above)
*Please Note at this time the SOUND that this prop has is a 4 tone beep that is NOT the same as the sound effect from the movie. While I am working to get that sound functional, I do not have it at this time. please see the above linked video
imgur.com/a/Jro7qBH
Thermal Detonator prop inspired by Star Wars. Electronics installed and ready to go. Battery (9v) operated and battery included. Top half and bottom half snap together and hold tight, but are able to be split apart again (may need a bit of leverage) to replace the battery/make repairs if necessary.
Droid Popper comes with White-blue LEDs instead of Yellow along the equator
un-built kit also available,
Fully Finished- 3d printed Thermal Detonator prop, print lines removed, painted, weathered, clear coated. electronics installed battery included.
Un-finished kit- 3d printed Thermal Detonator prop, no clean up/sanding done. 3 pieces. Electronics assembled, no battery, ready to install, Install instructions (pictures).
Electronics only- Electronics Kit assembled, install instructions
Electronics Install Instructions: https://docs.google.com/document/d/1DlJV_XNeil9f0Qft2vti2_T5GhVjtutn14YR2aTx9AM/edit?usp=sharing
*if your Thermal Detonator electronics ends up needing to be repaired I CAN do so for the cost of shipping back and forth. However, anyone who has a little bit of soldering knowledge should also be able to make any necessary repairs.
*6 month warranty- if the control board stops working within the first 6 months after receiving your prop I will replace it (just provide shipping for the return and re-sending). After this you will have to buy a new electronics kit (as listed above)
*Please Note at this time the SOUND that this prop has is a 4 tone beep that is NOT the same as the sound effect from the movie. While I am working to get that sound functional, I do not have it at this time. please see the above linked video
NOW WITH SOUND!!!!
imgur.com/a/Jro7qBH
Thermal Detonator prop inspired by Star Wars. Electronics installed and ready to go. Battery (9v) operated and battery included. Top half and bottom half snap together and hold tight, but are able to be split apart again (may need a bit of leverage) to replace the battery/make repairs if necessary.
Droid Popper comes with White-blue LEDs instead of Yellow along the equator
un-built kit also available,
Fully Finished- 3d printed Thermal Detonator prop, print lines removed, painted, weathered, clear coated. electronics installed battery included.
Un-finished kit- 3d printed Thermal Detonator prop, no clean up/sanding done. 3 pieces. Electronics assembled, no battery, ready to install, Install instructions (pictures).
Electronics only- Electronics Kit assembled, install instructions
Electronics Install Instructions: https://docs.google.com/document/d/1DlJV_XNeil9f0Qft2vti2_T5GhVjtutn14YR2aTx9AM/edit?usp=sharing
*if your Thermal Detonator electronics ends up needing to be repaired I CAN do so for the cost of shipping back and forth. However, anyone who has a little bit of soldering knowledge should also be able to make any necessary repairs.
*6 month warranty- if the control board stops working within the first 6 months after receiving your prop I will replace it (just provide shipping for the return and re-sending). After this you will have to buy a new electronics kit (as listed above)
*Please Note at this time the SOUND that this prop has is a 4 tone beep that is NOT the same as the sound effect from the movie. While I am working to get that sound functional, I do not have it at this time. please see the above linked video
imgur.com/a/Jro7qBH
Thermal Detonator prop inspired by Star Wars. Electronics installed and ready to go. Battery (9v) operated and battery included. Top half and bottom half snap together and hold tight, but are able to be split apart again (may need a bit of leverage) to replace the battery/make repairs if necessary.
Droid Popper comes with White-blue LEDs instead of Yellow along the equator
un-built kit also available,
Fully Finished- 3d printed Thermal Detonator prop, print lines removed, painted, weathered, clear coated. electronics installed battery included.
Un-finished kit- 3d printed Thermal Detonator prop, no clean up/sanding done. 3 pieces. Electronics assembled, no battery, ready to install, Install instructions (pictures).
Electronics only- Electronics Kit assembled, install instructions
Electronics Install Instructions: https://docs.google.com/document/d/1DlJV_XNeil9f0Qft2vti2_T5GhVjtutn14YR2aTx9AM/edit?usp=sharing
*if your Thermal Detonator electronics ends up needing to be repaired I CAN do so for the cost of shipping back and forth. However, anyone who has a little bit of soldering knowledge should also be able to make any necessary repairs.
*6 month warranty- if the control board stops working within the first 6 months after receiving your prop I will replace it (just provide shipping for the return and re-sending). After this you will have to buy a new electronics kit (as listed above)
*Please Note at this time the SOUND that this prop has is a 4 tone beep that is NOT the same as the sound effect from the movie. While I am working to get that sound functional, I do not have it at this time. please see the above linked video
